????

Declaration of Conformance

In accordance with ISO 6789-1:2017

Document number:

The torque tool identified in this document is declared to be in conformance with ISO 6789-1:2017.

The torque tool identified in this document is not in conformance with ISO 6789-1:2017.

Date:

????

Person Responsible:

_________________

Model:

????

Serial:

????

Target Torque N.m	Maxmimum Permissable Deviation	Observed Value Clockwise N.m
???	??.??	??.??	??.??	??.??	??.??	??.??
???	??.??	??.??	??.??	??.??	??.??	??.??
???	??.??	??.??	??.??	??.??	??.??	??.??
???	??.??	??.??	??.??	??.??	??.??	??.??
???	??.??	??.??	??.??	??.??	??.??	??.??
???	??.??	??.??	??.??	??.??	??.??	??.??

The test equipment used in the performance of the above calibration has international traceability through the following calibration laboratory which is UKAS accredited to ISO 17025:2005.

Device Model:

???

Device Serial:

???

TD Model:

???

TD Serial:

???

Certificate:

???

UKAS Laboratory:

0256

The torque measurement device has a maximum relative measurement error of less than or equal to 1.0%, and is less than ¼ of the maximum permissible relative deviation of the torque tool as required by ISO6789-1:2017 (Clause 6.1).